The Transonic® TS420 Perivascular Flow and TS410 Tubing Modules require a T402 or T403 Console in order to take measurements. T402 and T403 Consoles are multi-channel capacity cases with a shared universal power supply.
To remove the module from the console (say for repair) unscrew the thumb-screw on the front panel and pull out the module. In case of repair, you have to specify the serial number of the module. This can be found on the right side bottom corner after pulling out the module.
Afterwards, push the unit back into the console and use the thumb-screw to lock it into the console.
For further technical assistance with this or any other issue, please contact ADInstruments Technical Support by clicking HERE